| Model | CM-2600d |
| Illumination / observation system | d/8° (diffuse illumination, 8-degree viewing ), equipped with simultaneous measurement of SCI (specular component included)/SCE (specular component excluded) Conforms to CIE No.15,ISO 7724/1,ASTM E1164,DIN 5033 Teil7 and JIS Z8722 Condition C standard. |
| Size of Integrating Sphere | Φ 52mm |
| Detector | Silicon photodiode array (dual 40 elements) |
| Spectral separation device | Diffraction grating |
| Wavelength range | 360nm to 740nm |
| Wavelength pitch | 10nm |
| Half bandwidth | Approx. 10nm |
| Reflectance range | 0 to 175%, resolution: 0.01% |
| Light source | 3 pulsed xenon lamps (2 xon lamps forCM-2500 d) |
| Measurement time | Approx. 1.5 seconds (approx. 2 seconds for fluorescent measurement) |
| Minimum interval between measurements | 3 seconds for SCI/SCE (4 seconds for fluorescent measurement)
(simultaneous evaluation of SCI/SCE is possible by a single measurement) |
| Measurement/Illumination area | MAV: Φ8mm / Φ 11 mm
SAV: Φ 3mm/ Φ 6mm (Selectable between MAV and SAV)
(Only MAV is available for CM-2500d) |
| Repeatability | (Standard deviation) Spectral Reflectance: within 0.1% (360 to 380nm within 0.2%)
Chromaticity Value : ΔE*ab 0.04(When a white calibration plate is measured 30 times at 10-second intervals after white calibration) |
| Inter instrument agreement | ΔE*ab within 0.2 (MAV/SCI) Average for 12BCRA Series II color tiles compared to values measured with master body. |
| UV adjustment | Instantaneous numerical adjustment (no mechanical adjustment required) With UV400nm cut filter |
| Measurement mode | Single measurement/automatic averaging of multiple measurements(auto mode: 3, 5, 8 times/manual mode) |
| Interface | Output: RS-232C serial signals via RJ45 connector; USB 2.0 communication possible when using included USB-Serial Converter Cable IF-A24 |
| Observer | 2/10° (CIE 1931/2°,CIE 1964/10°) |
| Illuminant | A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two light sources) |
| Outputs | Spectral value/graph, colorimetric value, color difference value/graph, PASS / FAIL result, relativity gloss value |
| Data Memory | 1700 pieces of data (as SCI/SCE 1 data) * 700 pieces of data in the defined in COND mode.
*Total of the sample data for the COND and TASK modes and color difference target data |
| Battery performance | Alkaline manganese:approx. 1000 measurements |
| Display data | Spectral value/graph, colorimetric value, color difference value/graph, PASS/FAIL result |
| Color space / colorimetric data | L*a*b*, L*C*h, CMC (1:1), CMC (2:1), CIE94, Hunter Lab, Yxy, Munsell, XYZ, MI, WI (ASTM E313), YI (ASTM E313/ASTM D1925), ISO Brightness (ISO 2470), Density statusA /T, WI/Tint (CIE/Ganz), CIE00 |
| Tolerance display | Tolerance for color difference (both box and eliptical tolerances can be set) |
| Power source | 4 AA-size battery or AC adapter |
| Size (WxHxD) | 69 x 96 x 193mm |
| Weight | Approx. 670g (without batteries) |
| Operating temperature / humidity range (*1) | 5 to 40°C, relative humidity 80% or less (at 35°C) with no condensation |
| Storage temperature/humidity range | 0 to 45°C, relative humidity 80% or (at 35°C) with no condensation |
| Standard accessories | White calibration plate, Target mask Φ8mm, Target mask Φ3mm , RS-232C cable, AC adapter,AA-size battery (x4) |
| Optional Accessories | Hard case, Dust cover set, Dust cover, SpectraMagicTM NX (software), Zero calibration box |
